[INSTALLATION]


Insert the USB adapter to the computer, Windows will sense this
and ask for  a driver. Select a: or select driverpath if located
elsewhere and press NEXT. Windows starts install the USB driver. 
After this Windows will find and display a new screen asking for 
the serial port driver. Just repeat the procedure above and Windows 
will install it. Press Finish and installation is done ! 


[NOTES]

This driver is Plug´n play configured wich means that it will
install itself as nearest available comport number. To see wich
number you can rightclick on "My Computer" icon and select
properties in the popupscreen. In Win98 choose "Device manager", 
and in win2k click on HARDWARE tab and then on DEVICE MANAGER
button.Doubleclick on ports i the listbox. Now you can see wich 
number "Autocom USB to RS232 serial adapter" have, usually (com3,Com4,
com6 etc..). 

It is also possible to change this number by double
click on it and select "Port settings" and then click on the "Advanced"-
button and select com-number with the dropdownlist.

[FAQ]

Q:	Windows (XP) warns me about the driver is not signed. 
	And there can be compatibility problems?

A:	Just click continue anyway. This warning is displayed due to the 
	fact that we have modified som files to improve communication.

[KNOWN ISSUES]

	------------------------------------------------------------------------
	There is a bug in the driver that will give wrong baudrates 
	when changing com.number in the device manager. 
	
	If this problem	occur just uninstall the driver with Add/Remove programs 
	and connect the tester and install the driver again

	NOTE...
	This bug is fixed from FTSERIAL.SYS fileversion 1.09.01
	------------------------------------------------------------------------


[UNINSTALL

************************************************************************
                                                   
 
 	This section describes how to uninstall the drivers. 
	This is done by open the Control Panel and starting Add/Remove programs.
	In that window you will find "FTDI USB serial converters drivers".
	Select it and click on the remove button and the unistall program starts. 		Follow the instructions from the unistall program.                   	
                                                                      				
************************************************************************